MULTIPLE CHOICE:
1. In the weekly computer run to prepare payroll checks, a check was printed
for an employee who had been terminated the previous week. Which of the following
controls, if properly utilized, would have been most effective in preventing
the error or ensuring its prompt detection?
a. A control total for hours worked, prepared from time cards collected by the
timekeeping department.
b. Requiring the treasurer's office to account for the number of the pre-numbered
checks issued to the CBIS department for the processing of the payroll.
c. Use of a check digit for employee numbers.
d. Use of a header label for the payroll input sheet.
2. An auditor is preparing test data for use in the audit of a computer based
accounts receivable application. Which of the following items would be appropriate
to include as an item in the test data?
a. A transaction record which contains an incorrect master file control total.
b. A master file record which contains an invalid customer identification number
c. A master file record which contains an incorrect master file control total.
d. A transaction record which contains an invalid customer identification number.
3. Unauthorized alteration of on-line records can be prevented by employing:
a. Key verification.
b. Computer sequence checks.
c. Computer matching.
d. Data base access controls.
4. In auditing through a computer, the test data method is used by auditors
to test the
a. Accuracy of input data.
b. Validity of the output.
c. Procedures contained within the program.
d. Normalcy of distribution of test data.
5. In the preliminary survey the auditor learns that a department has several
microcomputers. Which of the following is usually true and should be considered
in planning the audit?
a. Microcomputers, though small, are capable of processing financial information,
and physical security is a control concern
b. Microcomputers are limited to applications such as worksheet generation and
do not present a significant audit risk
c. Microcomputers are generally under the control of the data processing department
and use the same control features.
d. Microcomputers are too small to contain any built-in control features. Therefore,
other controls must be relied upon.
6. The primary reason for internal auditing's involvement in the development
of new computer-based sysstems is to:
a. Plan post-implementation reviews.
b. Promote adequate controls.
c. Train auditors in CBIS techniques.
d. Reduce overall audit effort.
7. Which of the following is an advantage of generalized computer audit packages?
a. They are all written in one identical computer language.
b. They can be used for audits of clients that use differing CBIS equipment
and file formats.
c. They have reduced the need for the auditor to study input controls for CBIS
related procedures.
d. Their use can be substituted for a relatively large part of the required
control testing.
8. Processing simulated file data provides the auditor with information about
the reliability of controls from evidence that exists in simulated files. One
of the techniques involved in this approach makes use of
a. Controlled reprocessing.
b. Program code checking.
c. Printout reviews.
d. Integrated test facility.
9. Which of the following statements most likely represents a disadvantage
for an entity that keeps microcomputer-prepared data files rather than manually
prepared files?
a. It is usually more difficult to detect transposition errors.
b. Transactions are usually authorized before they are executed and recorded.
c. It is usually easier for unauthorized persons to access and alter the files.
d. Random error associated with processing similar transactions in different
ways is usually greater.
10. The possibility of losing a large amount of information stored in computer
files most likely would be reduced by the use of
a. Back-up files
b. Check digits
c. Completeness tests
d. Conversion verification.
11. An integrated test facility (ITF) would be appropriate when the auditor
needs to
a. Trace a complex logic path through an application system.
b. Verify processing accuracy concurrently with processing.
c. Monitor transactions in an application system continuously.
d. Verify load module integrity for production programs.
12. Where computer processing is used in significant accounting applications,
internal accounting control procedures may be defined by classifying control
procedures into two types: general and
a. Administrative.
b. Specific.
c. Application.
d. Authorization.
13. The increased presence of the microcomputer in the workplace has resulted
in an increasing number of persons having access to the computer. A control
that is often used to prevent unauthorized access to sensitive programs is:
a. Backup copies of the diskettes.
b. Passwords for each of the users.
c. Disaster-recovery procedures.
d. Record counts of the number of input transactions in a batch being processed.
14. Checklists, systems development methodology, and staff hiring are examples
of what type of controls?
a. Detective.
b. Preventive.
c. Subjective.
d. Corrective.
15. When an on-line, real-time (OLRT) computer-based processing system is in
use, internal control can be strengthened by
a. Providing for the separation of duties between keypunching and error listing
operations.
b. Attaching plastic file protection rings to reels of magnetic tape before
new data can be entered on the file.
c. Making a validity check of an identification number before a user can obtain
access to the computer files.
d. Preparing batch totals to provide assurance that file updates are made for
the entire input.
16. When auditing "around" the computer, the independent auditor
focuses solely upon the source documents and
a. Test data.
b. CBIS processing.
c. Control techniques.
d. CBIS output.
17. One of the features that distinguishes computer processing from manual
processing is
a. Computer processing virtually eliminates the occurrence of computational
error normally associated with manual processing
b. Errors or fraud in computer processing will be detected soon after their
occurrences
c. The potential for systematic error is ordinarily greater in manual processing
than in computerized processing.
d. Most computer systems are designed so that transactitrails useful for audit
purposes do not exist.
18. Given the increasing use of microcomputers as a means for accessing data
bases, along with on-line real-time processing, companies face a serious challenge
relating to data security. Which of the following is not an appropriate means
for meeting this challenge?
a. Institute a policy of strict identification and password controls housed
in the computer software that permit only specified individuals to access the
computer files and perform a given function.
b. Limit terminals to perform only certain transactions.
c. Program software to produce a log of transactions showing date, time, type
of transaction, and operator.
d. Prohibit the networking of microcomputers and do not permit users to access
centralized data bases.
19. What type of computer-based system is characterized by data that are assembled
from more than one location and records that are updated immediately?
a. Microcomputer system.
b. Minicomputer system.
c. Batch processing system.
d. Online real-time system.
20. Company A has recently converted its manual payroll to a computer-based
system. Under the old system, employees who had resigned or been terminated
were occasionally kept on the payroll and their checks were claimed and cashed
by other employees, in collusion with shop foremen. The controller is concerned
that this practice not be allowed to continue under the new system. The best
control for preventing this form of "payroll padding" would be to
a. Conduct exit interviews with all employees leaving the company, regardless
of reason.
b. Require foremen to obtain a signed receipt from each employee claiming a
payroll check.
c. Require the human resources department to authorize all hires and terminations,
and to forward a current computerized list of active employee numbers to payroll
prior to processing. Program the computer to reject inactive employee numbers.
d. Install time clocks for use by all hourly employees.
21. Compared to a manual system, a CBIS generally
1. Reduces segregation of duties. 2. Increases segregation of duties. 3. Decreases
manual inspection of processing results. 4. Increases manual inspection of processing
results.
a. 1 and 3.
b. 1 and 4
c. 2 and 3
d. 2 and 4.
22. One of the major problems in a CBIS is that incompatible functions may
be performed by the same individual. One compensating control for this is the
use of
a. Echo checks.
b. A self-checking digit system.
c. Computer generated hash totals.
d. A computer log.
23. Which of the following processing controls would be most effective in assisting
a store manager to ascertain whether the payroll transaction data were processed
in their entirety?
a. Payroll file header record.
b. Transaction identification codes.
c. Processing control totals.
d. Programmed exception reporting.
24. An organizational control over CBIS operations is
a. Run-to-run balancing of control totals.
b. Check digit verification of unique identifiers.
c. Separation of operating and programming functions.
d. Maintenance of output distribution logs.
25. Which of the following methods of testing application controls utilizes
a generalized audit software package prepared by the auditors?
a. Parallel simulation.
b. Integrated testing facility approach.
c. Test data approach.
d. Exception report tests.
26. An unauthorized employee took computer printouts from output bins accessible
to all employees. A control which would have prevented this occurrence is
a. A storage/retention control.
b. A spooler file control.
c. An output review control.
d. A report distribution control.
27. Which of the following is a disadvantage of the integrated test facility approach?
a. In establishing fictitious entities, the auditor may be compromising audit
independence.
b. Removing the fictitious transactions from the system is somewhat difficult
and, if not done carefully, may contaminate the client's files.
c. ITF is simply an automated version of auditing "around" the computer.
d. The auditor may not always have a current copy of the authorized version
of the client's program.
28. Totals of amounts in computer-record data fields which are not usually
added for other purposes but are used only for data processing control purposes
are called
a. Record totals.
b. Hash totals.
c. Processing data totals.
d. Field totals.
29. A hash total of employee numbers is part of the input to a payroll master
file update program. The program compares the hash total to the total computed
for transactions applied to the master file. The purpose of this procedure is
to:
a. Verify that employee numbers are valid.
b. Verify that only authorized employees are paid.
c. Detect errors in payroll calculations.
d. Detect the omission of transaction processing.
30. Matthews Corp. has changed from a system of recording time worked on clock
cards to a computerized payroll system in which employees record time in and
out with magnetic cards. The CBIS automatically updates all payroll records.
Because of this change
a. A generalized computer audit program must be used.
b. Part of the audit trail is altered.
c. The potential for payroll related fraud is diminished.
d. Transactions must be processed in batches.
31. Generalized audit software is of primary interest to the auditor in terms
of its capability to
a. Access information stored on computer files.
b. Select a sample of items for testing.
c. Evaluate sample test results.
d. Test the accuracy of the client's calculations.
32. An accounts payable program posted a payable to a vendor not included in
the on-line vendor master file. A control which would prevent this error is
a
a. Validity check.
b. Range check.
c. Reasonableness test.
d. Parity check.
33. In a computerized sales processing system, which of the following controls
is most effective in preventing sales invoice pricing errors?
a. Sales invoices are reviewed by the product managers before being mailed to
customers.
b. Current sales prices are stored in the computer, and, as stock numbers are
entered from sales orders, the computer automatically prices the orders.
c. Sales prices, as well as product numbers, are entered as sales orders are
entered at remote terminal locations.
d. Sales prices are reviewed and updated on a quarterly basis.
34. Which of the following is likely to be of least importance to an auditor
in reviewing the internal control in a company with a CBIS?
a. The segregation of duties within the data processing center.
b. The control over source documents. c. The documentation maintained for accounting
applications.
d. The cost/benefit ratio of data processing operations.
35. For the accounting system of Acme Company, the amounts of cash disbursements
entered into an CBIS terminal are transmitted to the computer that immediately
transmits the amounts back to the terminal for display on the terminal screen.
This display enables the operator to
a. Establish the validity of the account number.
b. Verify the amount was entered accurately.
c. Verify the authorization of the disbursement.
d. Prevent the overpayment of the account.
36. Which of the following audit techniques most likely would provide an auditor
with the most assurance about the effectiveness of the operation of an internal
control procedure?
a. Inquiry of client personnel.
b. Recomputation of account balance amounts.
c. Observation of client personnel.
d. Confirmation with outside parties.
37. Adequate technical training and proficiency as an auditor encompasses an
ability to understand a CBIS sufficiently to identify and evaluate
a. The processing and imparting of information.
b. Essential accounting control features.
c. All accounting control features.
d. The degree to which programming conforms with application of generally accepted
accounting principles.
38. Which of the following is not a major reason why an accounting audit trail
should be maintained for a computer system?
a. Query answering.
b. Deterrent to fraud.
c. Monitoring purposes.
d. Analytical review.
39. Adequate control over access to data processing is required to
a. Prevent improper use or manipulation of data files and programs.
b. Ensure that only console operators have access to program documentation.
c. Minimize the need for backup data files.
d. Ensure that hardware controls are operating and as designed by the computer
manufacturer.
40. When testing a computerized accounting system, which of the following is
not true of the test data approach?
a. The test data need consist of only those valid and invalid conditions in
which the auditor is interested.
b. Only one transaction of each type need be tested.
c. Test data are processed by the client's computer programs under the auditor's
control.
d. The test data must consist of all possible valid and invalid conditions.
41. In studying a client's internal controls, an auditor must be able to distinguish
between prevention controls and detection controls. Of the following data processing
controls, which is the best detection control?
a. Use of data encryption techniques.
b. Review of machine utilization logs.
c. Policy requiring password security.
d. Backup and recovery procedure.
42. Which of the following procedures is an example of auditing "around"
the computer?
a. The auditor traces adding machine tapes of sales order
batch totals to a computer printout of the sales
journal.
b. The auditor develops a set of hypothetical sales
transactions and, using the client's computer program,
enters the transactions into the system and observes
the processing flow.
c. The auditor enters hypothetical transactions into the
client's processing system during client processing of
live" data.
d. The auditor observes client personnel as they process the biweekly payroll.
The auditor is primarily concerned with computer rejection of data that fails
to meet reasonableness limits.
43. Auditing by testing the input and output of a computer-based system instead
of the computer program itself will
a. Not detect program errors which do not show up in the output sampled.
b. Detect all program errors, regardless of the nature of the output.
c. Provide the auditor with the same type of evidence.
d. Not provide the auditor with confidence in the results of the auditing procedures.
44. Which of the following is an acknowledged risk of using test data when
auditing CBIS records?
a. The test data may not include all possible types of transactions.
b. The computer may not process a simulated transaction in the same way it would
an identical actual transaction.
c. The method cannot be used with simulated master records.
d. Test data may be useful in verifying the correctness of account balances,
but not in determining the presence of processing controls.
45. When the auditor encounters sophisticated computer-based systems, he or
she may need to modify the audit approach. Of the following conditions, which
one is not a valid reason for modifying the audit approach?
a. More advanced computer systems produce less
documentation, thus reducing the visibility of the
audit trail.
b. In complex comuter-based systems, computer verification of data at the point
of input replaces the manual verification found in less sophisticated data processing
systems.
c. Integrated data processing has replaced the more traditional separation of
duties that existed in manual and batch processing systems.
d. Real-time processing of transactions has enabled the auditor to concentrate
less on the completeness assertion.
46. If a control total were to be computed on each of the following data items,
which would best be identified as a hash total for a payroll CBIS application?
a. Net pay.
b. Department numbers.
c. Hours worked.
d. Total debits and total credits.
47. In a distributed data base (DDB) environment, control tests for access
control administration can be designed which focus on
a. Reconciliation of batch control totals.
b. Examination of logged activity.
c. Prohibition of random access.
d. Analysis of system generated core dumps.
48. A control to verify that the dollar amounts for all debits and credits
for incoming transactions are posted to a receivables master file is the:
a. Generation number check. b. Master reference check. c. Hash total. d. Control
total.
49. The program flowcharting symbol representing a decision is a
a. Triangle.
b. Circle.
c. Rectangle.
d. Diamond.
50. An update program for bank account balances calculates check digits for
account numbers. This is an example of
a. An input control.
b. A file management control.
c. Access control.
d. An output control.
51. CBIS controls are frequently classified as to general controls and application
controls. Which of the following is an example of an application control?
a. Programmers may access the computer only for testing and "debugging"
programs.
b. All program changes must be fully documented and approved by the information
systems manager and the user department authorizing the change.
c. A separate data control group is responsible for distributing output, and
also compares input and output on a test basis.
d. In processing sales orders, the computer compares customer and product numbers
with internally stored lists.
52. After a preliminary phase of the review of a client's CBIS controls, an
auditor may decide not to perform further tests related to the control procedures
within the CBIS portion of the client's internal control system. Which of the
following would not be a valid reason for choosing to omit further testing?
a. The auditor wishes to further reduce assessed risk.
b. The controls duplicate operative controls existing elsewhere in the system.
c. There appear to be major weaknesses that would preclude reliance on the stated
procedures.
d. The time and dollar costs of testing exceed the time and dollar savings in
substantive testing if the controls are tested for compliance.
53. For good internal control over computer program changes, a policy should
be established requiring that
a. The programmer designing the change adequately test the revised program.
b. All program changes be supervised by the CBIS control group.
c. Superseded portions of programs be deleted from the program run manual to
avoid confusion.
d. All proposed changes be approved in writing by a responsible individual.
54. Which of the following is not a technique for testing data processing controls?
a. The auditor develops a set of payroll test data that contain numerous errors.
The auditor plans to enter these transactions into the client's system and observe
whether the computer detects and properly responds to the error conditions.
b. The auditor utilizes the computer to randomly select customer accounts for
confirmation.
c. The auditor creates a set of fictitious customer
accounts and introduces hypothetical sales
transactions, as well as sales returns and allowances, simultaneously with the
client's live data processing.
d. At the auditor's request, the client has modified its payroll processing
program so as to separately record any weekly payroll entry consisting of 60
hours or more. These separately recorded ("marked") entries are locked
into the system and are available only to the auditor.
55. Which of the following would lessen internal control in a CBIS?
a. The computer librarian maintains custody of computer program instructions
and detailed listings.
b. Computer operators have access to operator instructions and detailed program
listings.
c. The control group is solely responsible for the distribution of all computer
output.
d. Computer programmers write and debug programs which perform routines designed
by the systems analyst.
56. Access control in an on-line CBIS can best be provided in most circumstances
by
a. An adequate librarianship function controlling access to files.
b. A label affixed to the outside of a file medium holder that identifies the
contents.
c. Batch processing of all input through a centralized, well-guarded facility.
d. User and terminal identification controls, such as passwords.
57. While entering data into a cash receipts transaction file, an employee
transposed two numbers in a customer code. Which of the following controls could
prevent input of this type of error?
a. Sequence check.
b. Record check.
c. Self-checking digit.
d. Field-size check.
58. What is the computer process called when data processing is performed concurrently
with a particular activity and the results are available soon enough to influence
the particular course of action being taken or the decision being made?
a. Batch processing.
b. Real time processing.
c. Integrated data processing.
d. Random access processing.
59. Reconciling processing control totals is an example of
a. An input control.
b. An output control.
c. A processing control.
d. A file management control.
60. A disadvantage of auditing around the computer is that it
a. Permits no assessment of actual processing.
b. Requires highly skilled auditors.
c. Demands intensive use of machine resources.
d. Interacts actively with auditee applications.
61. The completeness of computer-generated sales figures can be tested by comparing
the number of items listed on the daily sales report with the number of items
billed on the actual invoices. This process uses
a. Check digits.
b. Control totals.
c. Validity tests.
d. Process tracing data.
62. Which of the following controls would be most efficient in reducing common
data input errors?
a. Keystroke verification.
b. A set of well-designed edit checks.
c. Balancing and reconciliation.
d. Batch totals.
63. On-line real-time systems and electronic data interchange systems have
the advantages of providing more timely information and reducing the quantity
of documents associated with less automated systems. The advantages, however,
may create some problems for the auditor. Which of the following characteristics
of these systems does not create an audit problem?
a. The lack of traditional documentation of transactions creates a need for
greater attention to programmed controls at the point of transaction input.
b. Hard copy may not be retained by the client for long periods of time, thereby
necessitating more frequent visits by the auditor.
c. Control testing may be more difficult given the increased vulnerability of
the client's files to destruction during the testing process.
d. Consistent on-line processing of recurring data increases the incidence of
errors.
64. Creating simulated transactions that are processed through a system to
generate results that are compared with predetermined results, is an auditing
procedure referred to as
a. Desk checking.
b. Use of test data.
c. Completing outstanding jobs.
d. Parallel simulation.
65. To obtain evidential matter about control risk, an auditor ordinarily selects
tests from a variety of techniques, including
a. Analysis.
b. Confirmations.
c. Reprocessing.
d. Comparison.
66. A major exposure associated with the rapidly expanding use of microcomputers
is the absence of:
a. Adequate size of main memory and disk storage.
b. Compatible operating systems.
c. Formalized procedures for purchase justification.
d. Physical, data file, and program security.
67. To ensure that goods received are the same as those shown on the purchase
invoice, a computerized system should:
a. Match selected fields of the purchase invoice to goods received.
b. Maintain control totals of inventory value.
c. Calculate batch totals for each input.
d. Use check digits in account numbers.
68. Errors in data processed in a batch computer system may not be detected
immediately because
a. Transaction trails in a batch system are available
only for a limited period of time.
b. There are time delays in processing transactions in a batch system.
c. Errors in some transactions cause rejection of other transactions in the
batch.
d. Random errors are more likely in a batch system than in an on-line system.
69. Which of the following is a computer test made to ascertain whether a given
characteristic belongs to the group?
a. Parity check.
b. Validity check.
c. Echo check.
d. Limit check.